VJ-2628TD v2.02

In order to be able to install firmware, the following tools are required:

Personal computer with MS Windows
Network cable to connect the Valuejet wit the pc
The latest MSA-tool (Mutoh Service Assistance) or VSM-tool (Valuejet Status Monitor)

Detailed instructions how to install the firmware, are described in the maintenance manual.

The latest current firmware can be downloaded below this article.

Release date: 18 october 2017

Added the menu “Update 18: CL Type”. This menu enables you to select the cleaning type and cleaning sequence you need, depending on the ink type you are using.
Added the menu “Update 19: CL Time”. This menu enables you to select the suction time during cleaning (short, normal or long), depending on the ink type you are using.

Release date: 18 august 2016

Modification to prevent the printer to ignore white space at the bottom. In the following situation, the printer ignores white space at the bottom:
- When white space at the bottom is 50mm or longer.
- When continuous printing is performed.
- When the gutter cover was removed.
Modification to prevent illegal printing

Release date: 16 january 2013

Compatibility with new type flash rom.

Note

This firmware is also compatible with the old type flash rom.
Network time-out interval extended from 60 secs to 300 secs
Additional ink types (RJ80DS1, RJ80DD) added in user ink type menu

Release date: 31 may 2012

Changed user mode adjustment pattern
Changed diagnostic mode Uni-D/Bi-D adjustment menu and pattern
Added the operation switch-over function per ink type
Adjustment pattern panel English display changed
Nozzle check switching feature. Nozzle check pattern in user mode, there is the request not to print “comb” pattern if it's 4color/6color/4x double.
Improved countermeasure of the stable firing for Sublimation transfer ink
Added the wave form switching feature for Sublimation transfer ink

Manual feed during feeding at the user menu Bi-D pattern => fixed
Diagnostic: Parameter ALL servo parameter default value was not printed with * mark since the printer chose the VJ2628TD (level2) default. => fixed.
At printing Set-up list in case of 4 color double setting, and drop size “larger”, and “Largest”, [1] media type and [5] drop size are not displayed correctly. => fixed
When PF is set +/- 15M and check the position, the feed direction becomes reverse. (if +/- 10M is set, this doesn't happen) => fixed.
At End action of CR maintenance, during CR is moving to home position, pressing UP or DOWN key to go back to the usual display message, after CR moves, it freezes. => fixed
During feeding without printing, even if pressing “CANCEL” key, it won't stop until finishing feeding. => fixed
Print start feed problem => fixed
When Ignore is set, the communication with H-CONT error occurs. => fixed.
In the normal mode adjustment pattern, the firing line becomes thinner. => fixed

Attachments (2)